MoSi2 Heating Elements – Gurdoo

High-Temperature MoSi₂ Heating Elements (1700°C-1850°C)

Grade 1700, 1800 & 1900 elements – engineered to reduce “joint burnout” and “temperature deviation” in precision furnaces
Gurdoo MoSi2 Heating Element U-Shape

Standard U-Shape Element

This is the most common configuration for lab muffle furnaces, dental sintering ovens, and general high-temperature kilns.

Gurdoo MoSi2 Heating Element Spiral-Shape

Helical / Spiral Heaters

This wound design fits horizontal tube furnaces and provides consistent heat distribution along the full chamber length.

Gurdoo MoSi2 Heating Element L-Shape

Vertical Suspension L-Shape

This shape is designed for top-loading vertical furnaces, with angled terminals that support free vertical movement during thermal expansion.

Standard Configurations & Custom Engineering

Agile Dimension Procurement: For standard shapes, no engineering drawings are required. We custom-machined lengths and shank spacings according to your dimensions.

Standard L-Shape Dimension Draw

Straight & L-Shape

Specify hot zone diameter (d), terminal diameter (D), heating length (Le), cold length (Lu)

Standard W-Shape Dimension Draw

Multi-Shank W-Shape

Commonly used for horizontal furnace placements. Specify center spacing (a).

U-shape & Terminal Bend Shapes Dimension Draw

U-Shape with Terminal Bend

Elements bent at 45° or 90° at the terminals to protect connection leads from furnace heat.

Gurdoo Special Shapes MoSi2 Heaters

Special Shapes & Chamber Cylinders

Complex non-standard geometries including coaxial heaters, cup shapes, and cylindrical modules with pre-fitted ceramic fiber linings.

Gurdoo Customized Engineering Drawing Design

Full Schematic Customization

We fabricate multi-bend custom MoSi₂ heaters directly from your technical blueprints. Every design is verified for voltage compatibility and expansion margins before production.

Gurdoo MoSi2 Element Joint Welding Taper Details

Preventing Joint Burnout: Micro-Plasma Sintering & High-Density SiO₂ Glaze

The transition zone between the heating section (d) and the cold terminal (D) is highly susceptible to mechanical and thermal stress. Gurdoo resolves this common failure point with a specialized micro-plasma welding process:

  • Low-Resistance Transition Taper: By eliminating structural micro-voids, our welding ensures uniform current density across the joint, preventing localized overheating under high electrical loads.
  • Pre-Passivated SiO₂ Protection: A dense, pre-formed quartz glaze layer completely seals the weld joint, isolating the molybdenum core from oxygen during rapid thermal cycling.
Gurdoo Massive MoSi2 Elements Active Warehouse Stock

Minimizing Kiln Downtime: 24-Hour Dispatch for Standard MoSi₂ Replacements

Heating element failure shouldn’t halt your production or lab schedule. We maintain active inventory visibility across our manufacturing network for rapid aftermarket replacement:

  • In-Stock Standard Elements: Standard U-shape elements ready to ship within 3 days.
  • Matching Accessories: ension clamps, copper leads, and hanger bricks are available to bundle with element orders – no separate sourcing delay.
  • Bulk Distributor Orders: Batch fulfillment available for aftermarket repair networks, with consolidated shipping to reduce freight cost.

Matching Installation Accessories

Contact Clamps & Support Blocks

High-conductivity heavy-duty terminal blocks and contacts. Maximizes electric surface contact to secure voltage flow and prevent terminal localized heat build-up.

Connecting Straps & Flexible Leads

Micro-braided multi-layered flexible copper connectors. Safely channels high currents while protecting fragile elements from expansion vibration stress.

Clamp Rings & Stainless Steel Clips

Rugged heat-resistant tension spring clamps and terminal rings. Delivers constant mechanical clamping force to prevent elements from slipping vertically.

Extreme-Heat Industry Applications

MoSi2 elements in dental zirconia sintering muffle furnace

Dental Zirconia Sintering

1550°C–1650°C sintering cycles for crowns and bridges.

Molybdenum disilicide heater peak 1800C heat test

High-Temp Testing

Furnace calibration at continuous 1800°C operation.

MoSi2 elements in semiconductor vacuum diffusion furnace

Semiconductor LPCVD

Clean-heat elements for high-vacuum deposition chambers.

Uniform box muffle kiln thermal heating chamber chamber

Chamber Uniformity

Within ±5°C temperature consistency across the hot zone (dependent on furnace design).

Global Transit Protection & Double Packing

Gurdoo Standard Seaworthy Export Wooden Crate Packing

Standard Export Packing

Plywood crates with shaped EPE foam inserts. Elements are fixed in place to prevent movement during shipping.

Gurdoo Specialized Anti-Vibration Suspended Air Packaging Option

Suspended Shockproof Packing (on request)

Elements are suspended in multi-layer EPE foam blocks. Protects bent terminal corners from vibration damage during ocean freight.

Physical Properties & Atmosphere Limit Parameters

Volume Density (g/cm³) Bending Strength (kg/cm²) Vickers Hardness Apparent Porosity Water Absorption Thermal Elongation
5.5 – 7.0 15 – 25 (HV) 570 kg/mm² 7.4% < 0.2% 4%
Working Furnace Atmosphere Max Element Operating Temperature (°C)
1700 Type 1800 Type 1850 Type 1900 Type
Air 1700°C 1800°C 1830°C 1850°C
Nitrogen (N2) 1600°C 1700°C 1700°C 1700°C
Argon / Helium (Ar / He) 1600°C 1700°C 1700°C 1700°C
Dry Hydrogen (Dew Point -80°C) 1150°C 1150°C 1150°C 1150°C
Wet Hydrogen (Dew Point -20°C) 1450°C 1450°C 1450°C 1450°C
Other Mixed Gases (e.g., 10% CO2 / 50% CO / 15% H2) 1600°C 1700°C 1700°C 1700°C
Other Mixed Gases (e.g., 40% CO2 / 20% CO) 1400°C 1450°C 1450°C 1450°C
Partially Burnt Ammonia (8% H2) 1400°C 1450°C 1450°C 1450°C

Precision Production via High-Tonnage CIP & Controlled Atmosphere Sintering

Gurdoo Molybdenum Disilicide elements Isostatic Press Sintering Facility Machines

To maintain consistent density and electrical properties across Grade 1700, 1800 and 1900 elements, our partner facilities use high-tonnage Cold Isostatic Pressing (CIP), extrusion lines, and atmosphere-controlled sintering furnaces.

Each batch is tested for bulk density, resistance per unit length, and weld joint integrity. Test reports are available upon request.

Technical Selection & Operation FAQ

Why do new MoSi₂ elements crumble at 400°C-700°C, and how can this “Pest Oxidation” be prevented?

+
A: This crumbling is known as “Pest Oxidation”. Within the 400°C-700°C range, molybdenum disilicide reacts with oxygen without forming the protective SiO₂ glass layer, leading to structural disintegration.

    How to prevent it:
  • Ramp quickly through the danger zone: adjust your PID controller to ramp from 300°C to 800°C at 50°C-60°C/min. Avoid holding temperature or idling in the 400°C-700°C range.
  • Pre-oxidize new elements: for new elements or furnaces after long shutdowns, heat to 1200°C-1300°C in air and hold for 2–4 hours. This forms a dense SiO₂ glaze that protects against lower-temperature attack.
Send us your current ramp rate and hold schedule – we’ll check if your profile puts you at risk.

Why do MoSi₂ elements keep burning out at the terminal joint, even with new replacements?

+
A: Terminal joint burnout is typically caused by one of three factors.

  • Inconsistent welding quality: micro-voids at the weld create localized resistance, generating heat that eventually fractures the joint. Look for a supplier that uses micro-plasma welding (not standard arc welding).
  • Clamps too tight or too loose: over-tightening restricts vertical expansion, causing mechanical stress at the joint. Under-tightening creates electrical arcing. Allow 2-3mm vertical clearance and torque clamps to the manufacturer’s spec.
  • Oxidation of the exposed joint: if the weld area lacks a glaze layer, oxygen attacks the molybdenum core at high temperature. A pre-formed SiO₂ glaze is essential for elements operating above 1600°C.
Send us a photo of your failed joint – we can often tell you the failure mode (mechanical or electrical) and recommend the right replacement type.

Why do my MoSi₂ elements fail prematurely – and how can I extend their service life?

+
A: Premature failure usually traces to one of these four causes. Here’s how to identify and fix each.

  • Overheating above grade limit: even brief excursions above the rated temperature accelerate grain growth and oxidation. Install a high-limit controller with a fast-acting thermocouple to catch spikes before they damage the element.
  • Mechanical stress from restricted expansion: if terminals are clamped too tight or bent during installation, thermal expansion creates internal cracks. Check that cold ends have 2-3mm vertical clearance and are perfectly aligned with the furnace terminals.
  • Frequent thermal cycling: every heat-up/cool-down cycle stresses the oxide layer. If your process allows, reduce the number of on-off cycles per day, or lower the idle temperature instead of shutting down completely.
  • Incorrect atmosphere for the grade: some grades perform differently in nitrogen, hydrogen, or mixed gases. Check the atmosphere table above – operating outside the recommended range accelerates oxidation or contamination.
Describe your failure pattern (cracked, swollen, melted, or shattered) and send us a photo – we’ll identify the most likely cause and suggest a fix.

Get a Selection & Quote Recommendation

Tell us your furnace type, operating temperature, and current element dimensions. If you have a drawing, upload it and we’ll check your specs – then reply with a grade recommendation, estimated lifespan, and a firm quote with lead time options within 24 hours.